[مقارنة أداء وحدة معالجة الرسومات حسب اللعبة]Checking the performance of “Street Fighter 6 Demo” with 22 kinds of GPU! -PC viewing

In this series, we’ll be using a number of GeForce and Radeon series GPUs and comparing frame rates for specific games simultaneously to show which GPU is the best choice for you. Instalment 26 will cover the “Street Fighter 6” beta, which will be released on June 2, 2023.

The mainly configured GPUs are high to mid-range, 15 kinds of GeForce and 7 kinds of Radeon, a total of 22 kinds of video cards. With the advent of the RTX 40 series for GeForce and the RX 7000 series for Radeon, some cards have been replaced from the 18th edition. The product name and specifications of the GPU to be covered and the video card it is equipped with are summarized at the end of the article, including the environment of the computer being used.

For the test conditions, I set the graphics preset to “HIGHEST” and turned it on.

Please also refer to the video below which summarizes the condition of the seat.

As a test condition, set the graphics preset to “best”. The promoter was not used.

Graphics settings for Street Fighter 6 Demo

I set the MaxFrameRate to “120” based on the preset quality “HIGHEST”, but the match goes to 60fps

Quality detail setting tested with default state set by preset “HIGHEST”

Since this game does not have a benchmark function, I measured the frame rate with CapFrameX when playing against CPUs. This time, based on the benchmark results, we will publish the average frame rate for Full HD and 4K.

Street Fighter 6 is the latest in the series of fighting games for adults. I think a lot of people are looking forward to the debut about 7 years ago.

At the time of writing the manuscript, it has not yet been released, but since the beta version was released on Steam, we will use it to check the performance of each GPU. It may be different from the product version, but it will serve as a guideline.

In addition, this game can set the frame rate up to 120fps, but it will drop to 60fps during the battle. It seems to be a limitation to maintain fairness, but it can be said that it is necessary to reach 60 FPS in order to create a battle environment close to the same conditions. hard to do).

When the quality that determines the overall image quality is set to “HIGHEST,” all GPUs other than the GTX 1650/1630/1060 scan an average of 60 frames per second for Full HD resolution. If the resolution is full HD, you will likely be able to play with a lot of GPUs.

Additionally, the GTX 1060 ran well at an average of 57.1 fps, which could arguably run adequately if the image quality was lowered. Also, given the amount of video memory used, it varies depending on the GPU, but even Full HD comes in at 5.1GB to 6.2GB.

With only 4GB GPU, some graphics like backgrounds will be simplified due to the lack of video memory. The RX 6500 XT hits 60fps, but keep in mind that the graphic will be different on GPUs of 6GB or more.

Getting to 60fps at 4K is very difficult. RTX 3070 or higher is required for GeForce series, RX 6800 or higher for Radeon series and upper middle GPU or higher.

The amount of video memory used is approximately 6.1 GB to 7.5 GB. GPUs with more video memory tend to consume more. I was able to make sure that part of the graphics was simplified when the video memory was 4GB plus Full HD.

By the way, Street Fighter 6 does not have an upgrade tool like DLSS or FSR that reduces the graphic load. If you want to reduce the graphic load, you need to change the image quality setting. I hope it will be useful for those who want to configure the environment before the GPU version.

The computer used is equipped with Core i9-13900

This series contains Core i9-13900 CPU (24 cores, 32 threads), Z790 chipset on motherboard, 32GB (16GB x 2) DDR5-4800 on memory, 1TB NVMe SSD on storage, and 12cm simple water cooling on cpu cooler, 1200 I am using a computer that uses a W power supply.

In terms of CPU power limit, the Long Duratin (PL1) power limit is 65W and the Short Duratin (PL2) power limit is 219W, according to Intel specifications.

List of used video cards

Some cards from the 18th Uncharted Treasure Hunter Collection have been replaced. With the addition of the RTX 40 series and Radeon RX 7000 series, the RX 5000 series has been cut short.

In addition, the RTX 4070 has been added from the 24th time, and the RTX 3080/3070/3060/3050 cards have also changed from the previous time due to the purchase of equipment. Let me introduce some of them.

GIGABYTE collaborates with the best RTX 30 series GPU. Photo “AORUS GeForce RTX 3070 MASTER 8G”. The high OC specifications of the triple fan and the LCD screen that can display GPU information, favorite pictures, GIFs, etc. on the top make it rich.

GeForce RTX 3060 uses ASUS DUAL-RTX3060-O12G-WHITE. The best feature of the OC model with two fans is the white color. It’s a boon if you want to build a uniform white PC

Additionally, the boost clock of the video card used here is a combination of OC and OC rating. An OC model is one whose boost clock in the GPU list is higher than the clock in brackets.

The ROG STRIX series from ASUS and the AORUS from GIGABYTE are equipped with a BIOS switch, but they are all set to a mode that increases performance. There are products that can increase the boost clock with tools, but this time I didn’t use tools and ran the test in the default state.

In addition, NVIDIA’s variable-scaling bar and AMD’s Smart ROM are enabled for all GPUs that can be enabled.

[سائق مستخدم]GeForce Game Ready 531.68, Adrenaline 23.4.1