Canon has released the latest updates for the EOS R3, EOS R5, EOS R5 Mark II, EOS R6, EOS R6 Mark II, EOS R7, EOS R8, EOS R10, EOS R50 and EOS R100.Company web pageIt can be downloaded from.
The contents of the update are as follows (quoted from the official website).
■ EOS R3 firmware version 1.8.0
-
During FTP transfer,[画像プロテクト]and[レーティング]Settings are now possible. -
[機内モード]but[入]In settings[有線LAN]Settings are now possible.
-
The following bugs have been fixed.
- 3-1 Fixed an issue where error 70 could occur when disconnecting from a Wi-Fi network.
- 3-2 Fixed the issue with the card access lamp flashing and the camera no longer accepting operations when shooting a small subject.
- 3-3 The phenomenon has been corrected where the camera no longer accepts operations when shooting while touch operations on the screen and buttons are running at the same time with specific customization settings.
- 3-4 Corrected a phenomenon where the camera would sometimes become out of focus at certain ISO sensitivities when shooting with High-Speed Continuous Shooting+ with High Brightness/High Gradation Priority enabled.
■ EOS R5 Mark II firmware version 1.0.1
- Corrected an issue where when shooting RAW/SRAW video using a lens that is not attached to the camera, a video file is recorded that cannot be played by the application software.
- Improved touch control stability when touch operation is set to “Sensitive”.
- Corrected the phenomenon where the camera screen might become abnormal when returning the viewfinder to the off position.
- Corrected the phenomenon that the camera may not operate correctly if the shutter button is operated during BUSY playback.
- Corrected the phenomenon that an Err70 could appear when switching the screen view point between the viewfinder and the screen during BUSY playback.
- Fixed the phenomenon where the camera screen might become unnatural after importing a video file captured using EOS Utility.
- Fixed an issue where video files captured using the EOS Utility could not be played back on the camera.
- Improved automatic white balance in certain environments when the custom picture function is turned on.
■ EOS R5 firmware version 2.1.0
-
When using the new LP-E6P battery pack, you can now use it without any functional restrictions. You'll be able to shoot at the same continuous shooting speed as when using the LP-E6NH. Additionally, you can charge the LP-E6P while it is inside the camera body. -
During FTP transfer,[画像プロテクト]and[レーティング]Settings are now possible.
-
The following bugs have been fixed.
- 3-1 Fixed an issue where error 70 could occur when disconnecting from a Wi-Fi network.
- 3-2 Fixed the issue with the card access lamp flashing and the camera no longer accepting operations when shooting a small subject.
- 3-3 A phenomenon where the camera would sometimes become out of focus at certain ISO sensitivities when shooting using High-Speed Continuous Shooting+ with High Brightness/Tone Priority enabled has been corrected.
■ EOS R6 Mark II firmware version 1.5.0
-
When using the new LP-E6P battery pack, you can now use it without any functional restrictions. You'll be able to shoot at the same continuous shooting speed as when using the LP-E6NH. Additionally, you can charge the LP-E6P while it is inside the camera body. -
During FTP transfer,[画像プロテクト]and[レーティング]Settings are now possible.
-
Supports peripheral cooperative control function. When a compatible lens is connected, peripheral format control will be performed (no need to set it on the menu screen).
-
The following bugs have been fixed.
- 4-1 The phenomenon in which errors 70 may occur when enabling shooting without high-frequency flash and OVF exposure and performing continuous shooting using the electronic shutter method has been corrected.
- 4-2 Fixed an issue where error 70 could occur when disconnecting from a Wi-Fi network.
- 4-3 Corrected the phenomenon where the camera might become out of focus at certain ISO sensitivities when shooting with High-Speed Continuous Shooting+ with High Brightness/Tone Priority enabled.
■ EOS R6 firmware version 1.9.0
-
When using the new LP-E6P battery pack, you can now use it without any functional restrictions. You'll be able to shoot at the same continuous shooting speed as when using the LP-E6NH. Additionally, you can charge the LP-E6P while it is inside the camera body. -
The following bugs have been fixed.
- 2-1 Fixed an issue where the card access lamp flashes and the camera no longer accepts operations when shooting a small subject.
- 2-2 The phenomenon that when shooting with High-Speed Continuous Shooting+ with High Brightness/Tone Priority enabled, the subject may become out of focus at certain ISO sensitivities has been corrected.
■ EOS R7 firmware version 1.6.0
-
When using the new LP-E6P battery pack, you can now use it without any functional restrictions. You'll be able to shoot at the same continuous shooting speed as when using the LP-E6NH. Additionally, you can charge the LP-E6P while it is inside the camera body. -
In the network connection,[WPA2][WPA3]It is now selectable.
-
Added support for the Digital Camera Software Development Support Kit (EDSDK/CCAPI).
-
The following bugs have been fixed.
- 4-1. Corrected the phenomenon where the message “Accessory cannot be used” appears when the camera resumes from auto power off when SPEEDLITE EL-5 or EL-10 (Camera Firmware Version 1.5) is installed (occurs 0 only).
- 4-2 The phenomenon where the camera would sometimes become out of focus at certain ISO sensitivities when shooting in High-Speed Continuous Shooting+ mode with High Brightness/Tone Priority enabled has been corrected.
■ EOS R8 firmware version 1.4.0
-
In the network connection,[WPA2][WPA3]It is now selectable.
-
Added support for the Digital Camera Software Development Support Kit (EDSDK/CCAPI).
-
The following bugs have been fixed.
- 3-1 The phenomenon in which errors 70 may occur when enabling shooting without high-frequency flash and OVF exposure and performing continuous shooting using the electronic shutter method has been corrected.
■ EOS R10 firmware version 1.6.0
-
In the network connection,[WPA2][WPA3]It is now selectable.
-
Added support for the Digital Camera Software Development Support Kit (EDSDK/CCAPI).
-
The following bugs have been fixed.
- 3-1. Corrected the phenomenon where the message “Accessories cannot be used” appears when the camera resumes from auto power off when SPEEDLITE EL-5 or EL-10 (Camera Firmware Version 1.5) is installed (occurs 0 only).
- 3-2 The phenomenon that when shooting with High-Speed Continuous Shooting+ with High Brightness/Tone Priority enabled, the subject may become out of focus at certain ISO sensitivities has been corrected.
■ EOS R50 firmware version 1.3.0
-
In the network connection,[WPA2][WPA3]It is now selectable.
-
Added support for the Digital Camera Software Development Support Kit (EDSDK/CCAPI).
-
The following bugs have been fixed.
- 3-1 Fixed a phenomenon where when shooting in High-Speed Continuous Shooting+ with High Brightness/Hue Priority enabled, the subject might become out of focus at certain ISO sensitivities.
■ EOS R100 firmware version 1.1.0
-
Added support for the Digital Camera Software Development Support Kit (EDSDK/CCAPI).
“Travel maven. Beer expert. Subtly charming alcohol fan. Internet junkie. Avid bacon scholar.”
More Stories
Introducing Ray-Ban® Change, whose frame changes color based on sunlight! – Japanese nylon
One of the scientific instruments of NASA's planetary probe “Voyager 2” has been shut down
A camera application developer talks about the performance of the iPhone 16 Pro camera, the ultra-wide angle and macro accuracy increased, but the main camera remained unchanged – GIGAZINE